On Point Service Company

logo

How To Prevent Your Furnace From Dying During The Winter

It’s that time of year again – the temperature is dropping, and you’re starting to think about turning on your furnace. But before you do, it’s essential to make sure that your furnace is in good condition. If it’s not, you could be in for a cold winter!

This blog post will discuss some of the most significant warning signs that your furnace needs maintenance. We’ll also give you some pointers on how to keep your furnace from dying throughout the winter. Keep warm!

Outline:

  • Signs That Furnace Needs Maintenance
  • Keep Your Furnace Alive
  • Schedule A Furnace Inspection

Signs That Furnace Needs Maintenance

Let’s have a look at some of the warning signals that indicate it’s time to get your furnace serviced:

The Furnace Is Making Strange Noises

If your furnace starts making unusual noises, it’s a good indication that it needs to be serviced. If you hear a loud humming noise, rattling sounds, or hissing, it’s time to call in a professional. These sounds could indicate something wrong with the furnace, and it needs to be fixed before it breaks down completely.

The Furnace Is Not Heating Your Home Evenly

Another common sign that your furnace needs maintenance is not heating your home evenly. If your house is cold in one area and warm in another, the heating system may need to be replaced. That can be a safety hazard and uncomfortable, so it’s essential to address the issue as soon as possible.

The Furnace Is Consuming More Energy Than Usual

If the furnace uses more energy than usual, it may be something wrong. That could mean that the furnace needs to be tuned up or even replaced. Be sure to keep an eye on your energy bills during the winter months and see a noticeable increase in usage.

The Furnace Is Not Turning On At All

If the heater does not turn on, there may be an issue with the thermostat or the furnace. If your furnace isn’t turning on, contact a professional for help. Attempting to repair it yourself might make the problem worse.

Some of the most important warning indicators that your heating system requires maintenance are listed below. If you discover any of these issues, get assistance immediately!

Keep Your Furnace Alive

Aside from these red flags, here are some ways to keep your furnace running throughout the winter without breaking down:

Filter Cleaning

Change The Air Filter Regularly

One of the most efficient strategies to preserve your heating system during the winter is to change the furnace filter regularly. If your heating unit overheats and breaks down as a result of a dirty air filter, replace it every month or two (depending on how often you utilize it).

Check For Leaks Around Vents And Pipes

By performing routine inspections for leaks around vents and pipes, you may prevent your heating system from failing throughout the winter. These minor leaks may not appear to be much at first, but they can accumulate rapidly if unchecked, causing severe damage in no time! Before turning on your heater each year, check all of these areas to make sure there are no new problems that need to be addressed.

Inspect Ductwork Regularly

Another technique to keep your heating system from breaking down during the winter is to inspect your ductwork. Each year, before turning on your heater, you should check all of these areas if any new issues need to be addressed.

Fitting

If Required, Clean Or Replace The Heat Exchanger

The heat exchanger in your furnace may be clogged or destroyed during the winter if it must be cleaned or changed. If you know how to repair it yourself, always contact a professional! The heating repairman will come out to your home once a year to inspect your furnace for issues, even if they are minor.

Service Blower Motor As Needed

The furnace’s blower motor can also fail in the middle of winter. If your furnace’s blower motor breaks down, you’ll need to call a professional. Ensure your heating system is checked before each operation to ensure no issues, so they don’t become significant expenses later!

Clean The Chimney

A blocked chimney can also cause your furnace to break down. If you’re not sure how to clean your chimney, it’s always a good idea to call a specialist! They will adequately clean it and check for any obstructions that might cause your furnace to fail.

Clean Burners

The burners in your furnace may also become dirty over time. That can cause decreased efficiency and, in some cases, a furnace failure. Ensure to clean them regularly (every few months) to ensure that they’re running correctly and at peak efficiency.

Get A Professional To Inspect It Regularly

Getting a professional inspection every few years can help prevent furnace failures! That will ensure that everything is working correctly and give you peace of mind knowing you’re doing what’s best for your home heating needs.

Schedule A Furnace Inspection

When you think about it, furnace maintenance should be done ahead of time. It’s the most crucial thing to maintain your home warm and pleasant during the cold winter months. So, why not set up a consultation with us right now? You won’t get any unpleasant surprises when we arrive unannounced since we can accommodate your demands.

Because our experts are thoroughly prepared, you can rest confident that all work will be finished promptly and correctly, without disrupting your daily routines or traffic flow due to the use of equipment like stairlifts and other gadgets designed especially for this sort of work. Whether you need a simple cleaning or more comprehensive services like as gas leak detection, On Point Service Company has you covered! Give us a call right now!

Leave a Comment

Your email address will not be published.

Skip to content